
Specialist commercial boiler and heating company across West and North Yorkshire. Boilers other firms gave up on. We keep them running.
Proactive maintenance and fault-finding repair for commercial heating plant, on natural gas, LPG and oil. Done properly, it costs less than starting again.
Commercial premises only. Based in Pool-in-Wharfedale. Just Commercial Boilers Ltd, Companies House number 16235462.
Boilers and pumps we work with
We work with all major commercial boiler manufacturers, including the brands shown here. Manufacturer names and logos belong to their owners.



- Ideal
- Viessmann
- Broag
- Andrews
- ACV
- Hamworthy
- Keston

Replacing is the easy sale.Repairing is the skill.We look again at the plant others wrote off,and we tell you what we find.
Why clients call us
Condemned does not always mean finished.
A boiler gets written off for all sorts of reasons: an engineer in a hurry, a part that looks obsolete, a quote that was easier to write than a diagnosis. The useful work is finding out what is actually wrong.
- Breakdowns you did not see comingFaults are traced to their cause and dealt with there, rather than patched until the next one.
- The same fault, againRepeat call-outs can mean the first diagnosis was wrong. A second pair of eyes is worth asking for.
- A replacement quote that feels prematureBefore you commit to new plant, it is worth knowing whether the old plant has a fixable fault.
- Compliance paperwork out of dateService records and the CP15 can be brought back in step with what is actually in the plant room.

Replace or repair first
Two answers to the same fault.
Most plant rooms get one verdict. We think the comparison deserves to be put in front of you, without numbers we cannot stand behind.
Sometimes replacement is the honest answer: a cracked heat exchanger, parts no longer made, a boiler that has outgrown the building. When it is, we say so and plan it properly.
VerdictRepair first
- Disruption
- One engineer working on the part that failed. The building carries on around the work.
- Downtime
- Only the plant being worked on, and only while the fault is being put right.
- Waste
- The failed part is replaced. Everything that still works keeps working.
- Timescale
- Diagnose the fault, agree the fix, carry it out.
- Spend
- Priced on the fault that was found, so you are not paying for new plant you may not need.
What we do
Commercial boiler and heating services, in the order most buildings need them.
Keeping plant running is the core of the business. Installing and replacing it is what we do when that is the right call. We work on commercial boilers and heating plant fired by natural gas, LPG or oil. Our work is focused on commercial heating, not catering equipment.

Commercial Boiler Repairs
Fault finding on boilers, controls, pumps and pipework, where the cause and the proposed fix can be asked for in plain terms.
View service
Commercial Boiler Servicing
Annual inspection and combustion analysis for one boiler or a whole plant room.
View service
Commercial Boiler Maintenance
A planned schedule of visits for boilers, pumps and controls, set out in one agreement.
View service
Commercial Heating Engineers
Surveys, servicing and repairs for the whole plant room, open to discussion.
View service
Commercial Heating Systems
Whole-system design, pipework, zoning and controls, covering more than the boiler at the heart of it.
View service
Commercial Boiler Installation
New plant sized to the building, with flue, controls and pipework planned before work starts.
View service
Commercial Boiler Replacement
Planned removal of ageing plant and its replacement with efficient modern boilers.
View service
How we work
Maintain it, mend it, and say it straight.
Proactive, not reactive
Planned servicing and maintenance catch wear before it turns into a breakdown. The visits are scheduled. The surprises are not.
Repair before replace
Where plant can be returned to a safe, reliable condition, repair is the route to ask about first, because it costs less than replacing the plant.
Straight advice
You get the findings, what they mean and what is proposed, in plain words. If the honest answer is new plant, you will hear that too.

The record insurers and auditors ask to see.
Compliance
Do your premises have a current CP15 record?
Employers have a responsibility to look after the gas plant in their premises. The CP15 is a record form that documents when commercial gas heating plant, on natural gas or LPG, was commissioned and serviced, and employers, landlords, managing agents and facilities managers commonly keep one on file.
Insurers and auditors often ask to see it, and a missing or out of date record can make a claim or an audit harder than it needs to be. Gas plant is normally serviced once a year, and the record should keep pace with that.
What is a CP15 certificate?
Put simply, a CP15 is the paper trail for commercial gas appliances: a record of the commercial gas heating plant in your building, when it was commissioned and when it was last serviced. If you run a business from rented or owned premises with a commercial boiler, it is worth finding out whether yours is current.
How it works
Three steps from a fault to a decision.
Step 1: Tell us what is wrong
Premises type, the plant you have if you know it, and what it is doing or not doing. A photograph of the plant room helps.
Step 2: The fault gets a proper look
Ask for the fault to be tested and traced to its cause before any part is proposed, rather than swapped on a hunch.
Step 3: You decide with the facts
A plain account of what was found, what a repair involves and, where it applies, what replacement would involve instead.
FAQ
Questions about repair, maintenance and compliance
Can a boiler that has been condemned be repaired?
It can. A condemned label means an engineer judged the appliance unsafe to leave running at that moment, which is not the same as the plant being beyond economic repair. Ask us to look at it again: the fault is traced to its cause and you get a plain answer on whether a repair would bring it back to a safe, reliable condition. Where it would not, we will tell you so.
Is repairing a commercial boiler cheaper than replacing it?
It usually costs less. The quote follows the fault that was found, so you pay for the part and the labour that fix it instead of for a whole new installation. We do not publish figures, because every fault and every building is different; you can ask for what a repair would cover to be set out.
When is replacement the right answer?
When the fault cannot be put right to a safe standard, when parts are no longer available, when repairs are arriving faster than the savings they bring, or when the plant no longer suits how the building is used. If a survey finds that, the replacement can be planned around trading hours rather than forced on you by a breakdown.
Which fuels and systems do you work on?
We specialise in commercial boiler and heating plant servicing, repairs, maintenance and inspections, working with natural gas, LPG and oil heating systems. Our work is focused on commercial heating, not catering equipment.
What is a CP15 certificate?
Put simply, a CP15 is the paper trail for commercial gas appliances: a record of the commercial gas heating plant in your building, when it was commissioned and when it was last serviced. If you run a business from rented or owned premises with a commercial boiler, it is worth finding out whether yours is current.
What does proactive maintenance actually involve?
A planned programme of visits for the whole heating plant: boilers, pumps, valves and controls. Wear can be spotted and dealt with before it causes a failure, readings can be recorded so trends can be seen, and the service record can be kept current. It replaces the pattern of waiting for a cold building and then paying for an urgent fix.
What is the difference between a service and a maintenance contract?
A service is the annual inspection and combustion check of a boiler. A maintenance contract is the standing arrangement around it: a schedule of visits, a list of the plant covered and an agreed way of handling faults between visits. Servicing suits a site that wants a dependable yearly check; a contract suits a site that wants the plant looked after all year.
Do you work on boilers from different manufacturers?
Yes. Commercial plant rooms rarely contain one brand, and the fault-finding approach is the same whatever the badge on the casing. Tell us the make and model if you know it, or send a photograph of the data plate, and we can take it from there.
What information helps you give an accurate quote?
The type of premises, the make and model of the existing boilers if known, any recent service reports and a few photographs of the plant room. None of it is essential to make contact, and the more of it you have, the easier it is to give a sensible answer.
Do you only work on commercial premises?
Yes. Offices, retail units, industrial and trade units, hospitality venues, schools, care settings and community buildings. The questions that matter are the ones a building manager raises: access, tenants, permits and how the building is used.
How do I request a quote?
Use the enquiry form on this page or the contact page, or call us. Tell us the type of premises and what the plant is doing, and we will come back to you to talk it through before anything is committed to.
Enquiry
Tell us about the boiler before anyone writes it off.
Three short steps: the job, your details, a quick check. We will come back to you to talk it through.
Prefer to talk?
