
Service
Commercial boiler maintenance contracts for plant you intend to keep
A commercial heating maintenance contract is a standing agreement to look after boiler plant on a planned schedule rather than booking visits one at a time. It lists the boilers, pumps and controls covered, sets out the visits and says what happens when a fault is found. Its purpose is to keep plant running for its full life and to make downtime and spend predictable.
The work
What a maintenance contract sets out
Maintenance is the standing arrangement. Rather than booking a single visit, you agree a programme for the whole heating plant: boilers, pumps, controls, valves and the pipework that links them.
The point of a contract is predictability. It lists the visits and the equipment covered, and it is where the handling of faults is set out, which is what facilities managers and landlords look for in one.
It is also the opposite of the replacement reflex. A boiler under a maintenance programme is watched: readings are tracked, wear is dealt with as it appears, and a unit is retired when the evidence says so, not when a breakdown forces the decision. Contracts are shaped around the site, from a small office to a multi-boiler plant room.
- Visit scheduleThe number and timing of visits through the year.
- Plant listEvery boiler, pump set and control panel the agreement covers, with a condition note.
- Seasonal checksA pre-winter inspection of plant before the heating season starts can be included.
- Fault handlingHow faults are reported and dealt with during the contract term.
- FindingsWhat was found on each boiler or pump set can be set out in plain terms.
- ReviewA look at the plant condition and what is likely to need replacing, and when.
Plan it or wait for it
Two ways to run a plant room.
One is a schedule. The other is a phone call on a cold morning. The comparison is qualitative, because every plant room is different.
A contract does not promise that nothing will ever fail. It promises that when something does, it is already on a list, with a history, and somebody knows the plant.
VerdictPlanned maintenance
- Breakdowns
- Wear is found at a scheduled visit and dealt with while it is still a part.
- Budget
- Spread across an agreed programme, with replacement planned years out.
- Records
- A plant list, readings by visit and a service history an insurer can read.
- Plant life
- Run to the full life the equipment was built for.
- The replace decision
- Made on evidence, in advance, around the building's calendar.
What it involves
How a contract comes together
Step 1: Audit
The plant on site is listed, with its age and condition.
Step 2: Schedule
A programme of visits and the equipment covered can be set out.
Step 3: Deliver
Visits follow the programme set out in the contract.
Step 4: Review
How the plant is performing is reviewed, and equipment approaching the end of its life is flagged early.
Premises
Sites this suits
- Multi-tenant offices
- Managing agent portfolios
- Hotels
- Schools and colleges
- Care settings
- Industrial units
FAQ
Commercial Boiler Maintenance questions
What is the difference between servicing and a maintenance contract?
Servicing is the annual inspection of the boiler. A maintenance contract is a wider standing agreement covering the whole heating plant, with a visit schedule, an asset list and a way of handling faults through the year.
What equipment can a maintenance contract cover?
Boilers, circulation pumps, pressurisation units, controls, valves and associated pipework. A contract usually lists what is included, which is how it shows what is and is not covered.
How many visits a year does a contract involve?
It depends on the plant and how it is used. A small system needs fewer visits than a larger multi-boiler plant room, and we can talk through what suits yours.
Can a contract include a pre-winter check?
A pre-winter check can be part of a schedule. It means issues can be found before the heating season, when plant is under the least pressure to perform.
How are repairs handled during the contract?
A maintenance agreement is where the handling of faults is set out, so it is worth reading that part closely. Ask us about it when you enquire.
Can a contract cover several sites?
Managing agents and multi-site operators often want one agreement across several buildings, with the plant at each site listed. Ask us about your sites.
Should each boiler be looked at individually?
It helps. Checking each boiler and pump set on the plant list in turn gives a picture of the condition of every asset, which is useful to insurers and for planning replacement.
Does a contract help us plan replacement?
It can. A review of the condition and age of plant shows which assets are approaching the end of their useful life well ahead of time.
Can a contract fit around an in-house facilities team?
Many commercial buildings have an in-house facilities team, so reporting lines, access arrangements and who signs off work are worth raising early. We can talk through your set-up.
How long does a contract run for?
The length of a contract term depends on the premises and the plant, and is worth discussing before anything is signed. Ask us about it.
Enquiry
Put the plant room on a schedule
Tell us about the site and the plant you know of. We will come back to you to talk through what a programme would cover.
Prefer to talk?
