
Service
Commercial boiler servicing that reads the plant, not just the calendar
A commercial boiler service is a scheduled inspection of one boiler or a plant room full of them, on gas, LPG or oil: combustion analysis, safety devices, flue and gas tightness, and the water side. It is normally yearly, and the readings turn an opinion about an ageing boiler into a measured one. Insurers, landlords and auditors tend to ask for the record.
The work
What a service visit checks
Servicing is the annual visit. An engineer attends, works through the boiler against the manufacturer service schedule, measures combustion and explains what was found in plain terms.
A service is also where a boiler earns its reputation. Readings taken year after year show whether a unit is holding its efficiency or slipping, so the question of when it should be retired is answered by numbers on a sheet rather than by a feeling on the day. A boiler that has been called tired deserves that sheet before it deserves a skip.
It suits premises that want a dependable yearly check without taking on a wider plant care arrangement, and it is how many sites stay prepared for an insurance renewal or a landlord inspection. If something needs more than a service can cover, that is a separate conversation, and we can talk it through.
- Combustion analysisFlue gas readings taken and compared with the expected range for the unit.
- Burner and heat exchangerInspected and cleaned where the manufacturer schedule calls for it.
- Safety devicesFlame failure, overheat and pressure protection tested for correct operation.
- Gas and flueTightness and flue integrity checked at the appliance.
- Water sideSystem pressure, expansion vessel and visible leaks looked at.
- FindingsWhat the engineer found, explained in plain terms with any recommended work.
What it involves
How a service visit runs
Step 1: Book
Access, timing and the boilers on site are the starting points.
Step 2: Attend
Each unit is serviced and readings are taken.
Step 3: Explain
Findings are explained, with any recommended work listed separately.
Step 4: Plan ahead
Next year's service or a wider maintenance arrangement can be talked through.
Premises
Premises this suits
- Offices
- Shops and showrooms
- Pubs and restaurants
- Places of worship
- Schools
- Light industrial units
FAQ
Commercial Boiler Servicing questions
How often should a commercial boiler be serviced?
Once a year is the usual interval, following the manufacturer service schedule for the unit. Some plant, or some premises with heavier use, may justify more frequent attention, and that depends on the plant itself.
What does a service visit actually involve?
A service means inspecting the boiler, taking flue gas readings, testing the safety devices, checking gas and flue tightness and looking at the water side of the system, with the findings explained afterwards.
How long does a service take on site?
A single boiler is a smaller job than a plant room with several units, and the time on site depends on the number and type of boilers. Ask us about your plant.
Do you need the heating off during a service?
The boiler being serviced needs to be out of use for part of the visit. Where a building has several boilers, they can be serviced one at a time so some heat is kept.
What if a service turns up a problem?
A problem found during a service is explained along with the possible next steps. Anything beyond the scope of a service is a separate piece of work, and we can talk it through.
Is a one-off service available without a contract?
Ask us. A single annual service and a wider programme covering pumps, controls and seasonal checks are different things, and a maintenance contract is the wider one.
Who usually asks about a boiler service history?
Insurers, landlords, managing agents and auditors commonly ask whether plant has been serviced. Having a current annual service in place makes those conversations easier.
Do you service boilers you did not install?
Commercial boilers come from a range of manufacturers, and a service does not depend on who installed the unit. Tell us what is on site when you get in touch.
What should we think about regarding how our premises are used?
Opening patterns, access routes and who holds the keys all affect a service. Tell us about the premises and we can talk through it.
How do I ask about a commercial boiler service?
Use the quote form or call. Tell us the type of premises, how many boilers you have if you know, and roughly when the last service was done, and we can talk through a quote.
Enquiry
Book the yearly visit that keeps the record straight
Tell us how many boilers you have, if you know, and roughly when they were last serviced. We will come back to you.
Prefer to talk?
